Author Topic: Power steering pump  (Read 2374 times)

Power steering pump
« on: 09/14/10, 03:12PM »

Offline BIGGRHAMMR

  • Ranch Local
  • *
  • Posts: 24
Doing all the finishing touches on my YJ diesel conversion, and I'm just now adding power steering.  Question is, does the inlet elbow on the power steering pump screw off, or does anyone know how it's attached? This is a pump off a 94 YJ with a 2.5
Here's the pic  http://picasaweb.google.com/lh/photo/uBEsBJnl-A0gti2DwJ7r0i88itdF915b0lsSwqLFjzA?feat=directlink

Re: Power steering pump
« Reply #1 on: 09/15/10, 09:04AM »

Offline bronco ted

  • Ranch Regulator
  • Ranch Local
  • *
  • Posts: 287
All that i have seen on that pump are press fitted. Ted
Good advice comes from experience and a lot of that comes from bad advice

Re: Power steering pump
« Reply #2 on: 09/15/10, 03:41PM »

Offline BIGGRHAMMR

  • Ranch Local
  • *
  • Posts: 24
Your right, I found out today form Oreillys.  I needed to twist it about 90 deg, and didn't want to ruin anything.  Thanks